Scuba O-링
스쿠버 다이빙 장비와 부품에 사용되는 O-링입니다.
| 품번 | 사 용 |
|---|---|
| 003 | Submersible pressure gauge/consoles: internal swivel seal |
| 004 | Older internal swivel seal models; AT-PAC BC’s Power inflator control Sherwood 6121-122, Apeks id: AP6403 |
| 005 | Seal used in older depth and tank “stem” gauges |
| 006 | Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal .Sherwood 5121-101,6500-118, scubpro1.050.117,mares 46110101,Apeks ID:AP1299 |
| 007 | Regulator piston ring; small HP seal ,Sherwood G007A |
| 008 | Sonic regulators; Regulator piston ring; small HP sea, Sherwood 6110-129, Scubapro 1,050,126 |
| 009 | Seal in open-tube depth gauges, Sherwood 6121-135,6400-113 |
| 010 | Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calupso Regulators; Power inflators stems;Sherwood 5121-104,6110-119,6161-101,6121-137,Scubapro1,050,351,Mares 46110107, APEKS ID:AP1154 |
| 011 | Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler, Scubapro 1,050,351,Mares 46110107, Sherwood 5121-103,APEKS:AP1409 |
| 012 | Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs, Scubapro 1,050,145, Mares 46110108, 46110110,APEKS :AP1445 |
| 013 | Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals Sherwood 6400-115, Scubapro 1,050,147, Mares 46110215,APEKS :AP1410 |
| 014 | + 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator,Sherwood 5121-105, scubapro 1,050,347, Mares 46110211,APEKS :AP1159 |
| 015 | 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals,Shewood 5121-106, Scubapro1,050,158,APEKS :AP1267 |
| 016 | Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves,Sherwood 6400-125,6500-129,scubapro 1,050,160 |
| 017 | Regulator piston ring and cap; Dacor HP module,Scubapro 1,050,160, 1,050,162, Mares 46110225 |
| 018 | Regulator piston ring (1970’s); 2nd stage inlet seal; Body plug seal |
| 019 | Healthway / USD / Sherwood industrial piston regulator,APEKS :AP1438 |
| 020 | Regulator piston ring (USD & SAS) Sherwood 6400-102 |
| 021 | Regulator piston ring |
| 022 | Common regulator piston ring; Body plug seals; Paintball guns, Sherwood 5110-107, Scubapro 1,050,177 |
| 023 | Regulator LP swivel seal; Body plug seals Sherwood 6110-131,6400-107 |
| 024 | Piston cap seals (USD); SAS 1st stage Sherwood 6110-125,APEKS :AP1420 |
| 025 | Gauge lenses, Sherwood5110-109 |
| 026 | For Suunto C3,Cobra,EON, VIPER,FAVOUR,AIR LUX Computers |
| 027 | Scubapro part no 1,050,164 |
| 106 | Sherwood part no 5121-102 |
| 107 | Sherwood part no 6121-129 |
| 109 | Scubapro part no 1,050,385 |
| 110 | Old double manifolds; Spearguns |
| 111 | Australian/ Nemrod valves; BC inflators; DIN regulator seals Sherwood 6400-138, Scubapro 1,050,193;1,050,428, Mares 46110247, APEKS :AP1166 |
| 112 | Steel tank valve; Basal DIN seal ,Scubapro 11,361,115 |
| 113 | Aquarius piston ring / cap seal; Healthway regulators |
| 114 | Early piston models; Paintball Guns |
| 115 | AMF HP module; BC fittings |
| 116 | Genesis tank valve; BCD Inflator Mechanisms; Paintball Guns |
| 211 | Early BC fittings |
| 213 | Early BC fittings |
| 214 | Cylinder to 3/4 valve seal; Cylinder to M25X2 valve Seals |
| 215 | Cylinder to M25X2 valve Seals |
| 610 | BCD internal hose o-ring clip end |
| 2.4 x 1.9 RO | Scubapro part no 1,050,317 |
| 24 X 2 | For Suunto C6,Zander |
| 36 X1.5 | For Suunto C9 and D9 |
| 39 X 1 | For SUUNTO C1, Stinger, Spider computers |
| 39 X 1.50 | For Suunto C8 and D4 |
| 15 X 4.00 | Mares part no 46200559 |
| 902 | Scubapro part no 1,050,293 |
| 903 | Sherwood part no 6121-141 |
| 905 | Sherwood part no 6400-135 |
| 906 | Sherwood part no 6110-115 & 6121-104 |
| 119 | Mares Spear Gun |
| 123 | |
| 27 x 1.3 | For Aeris F10 diving watch |
| 1.7 x 1.0 | For APEKS regulators |
| 1.95 X 1.0 | Sherwood part no 6500-112 |
| 2.20 X 1.0 | Scubapro part no 1,050,363 |
| 2.5 x 1.0 | For APEKS regulators |
▲ 출처 : https://scubagaskets.com/application-guide/
| 품번 | 외경(인치) | 사 용 |
| 214 | 1-1/4 | Cylinder with Large Neck/Valve (3/4 NPS – All Aluminum, most Steel cylinders) |
| 112 | 11/16 | Standard DIN Regulator/Valve (Nearly all DIN regulators) |
| 111 | 5/8 | Small DIN Regulator/Valve (You know if you need this one) |
| 015 | 11/16 | Cylinder Valve Bonnet Nut |
| 014 | 5/8 | Standard Yoke Regulator/K-valve |
| 013 | 9/16 | Large Low-Pressure Port/Hose (1/2 UNF) |
| 012 | 1/2 | High-Pressure Port/Hose (7/16 UNF) Manifold and Manifold Port Plugs |
| 011 | 7/16 | Standard Low-Pressure Port/Hose (3/8 UNF) |
| 010 | 3/8 | Low-Pressure Hose/2nd Stage Regulator Cylinder Valve Stem |
| 003 | 3/16 | High-Pressure Hose/SPG Swivel |
▲ 출처 : https://www.divegearexpress.com/viton-master-o-ring-kit-50-pieces
| 품 명 | O-링 번호 |
| BC 파워 인플레이터 | 006 2개, 011 1개, 012 1개, 112 1개 |
| 게이지 오링 | 003 2개 |
| 탱크 밸브 | 3/4 NPS, M25X2 목 214 1개 요크 타입 014 1개, 딘 타입 112 1개 |
| 표준 저압 호스 | 1단계쪽 011 1개 |
| 고압 호스 | 1단계쪽 012 1개 |
※ 위 내용은 다이빙 장비에 사용되는 O-링을 설명하기 위한 것입니다. 혹시라도 위 내용을 참고해서 본인의 장비에 O-링을 교체하여 발생하는 문제에 대해서는 이 글의 작성자와 이 블로그의 운영자는 민,형사상 책임이 없음을 알려드립니다. 교체한 본인의 책임입니다. 다이빙 장비에 대한 유지보수 자격이 없는 경우, 반드시 전문가에게 수리를 맡겨 수리와 점검을 받으시길 바랍니다.